岳振明

副教授，博士生导师，主要从事金属及金属基复合材料精确塑性成形理论、结构力学仿真和智能化制造等方面的研究。2017年入选山东大学未来学者、获威海市校地人才计划支持。近年来，已共发表科研论文五十余篇，授权发明专利十余项，出版学术专著1部。担任国际期刊MSEA、IJDM、JMPT、IJMS、Composite Part B等期刊审稿人，第三届国际损伤大会组织委员会成员。 项目列表： 主持 国家自然科学基金重大项目子课题：**能耗理论与跨尺度力学行为，2022.01-2026.12. 主持 国家自然科学基金面上项目：**强化机理及其构件成形工艺优化,2022.01-2025.12. 主持 国家自然科学基金青年科学基金项目：**损伤模型构建及应用研究，2017.01-2019.12.  主持 国防科技JCJQ项目（外协）：**变形强化及失效行为实验研究，2022.01-2023.12. 主持 山东省重点研发计划：**制备关键技术研发及应用，2018.01-2019.12. 主持 山东省自然科学基金: **全耦合损伤模型构建，2015.07-2016.12. 主持 国家博士后科学基金: **对铝合金板料损伤预测的影响研究。2015.09-2017.09. 主持 国家博士后科学基金: **后继各向异性对板料回弹的影响。2019.01-2020.12. 主持 金属基复合材料国家重点实验室开放基金:**材料塑性变形及断裂行为的研究，2020.01-2021.12. 主持 第三批山东大学青年学者未来计划，2017-2022年。 主持 威海市科技攻关计划项目:**复合材料IDM技术工艺研究，2015.09-2017.09 主持 苏州市科技计划项目:**晶体的关键技术研究，2018.07-2020.06 主持 企业横向: **  设计及整车研发，100万元，2022.01-2023.12。 主持 山东大学基本科研业务费项目:**金板料成形极限预测， 主持 企业横向:**材料IMD技术研究，2015.09-2016.09。 主持 企业横向:**多相模拟实验系统构建及仿真分析，2020.01-2020.2 主持 企业横向:*缺陷识别方法及系统搭建，2021.1-202212 主持 企业横向:**模具技术研发，2017.09-2018.09。 主持 横向:**变路径循环加载力学测试，2021.05-2021.12. 论文列表： 2021 Z.R. Zhang, Z.M. Yue, Y.M. Bao, C.W. Xu, J. Gao, Strain ratio effects on microstructure discovery and low-cycle fatigue behavior of DP600 steel under cyclic shear path, Materials Science and Engineering: A, 2021-11-03,142291, https://doi.org/10.1016/j.msea.2021.142291.(5.234) Zhang, Z, Yue, Z*, Qi, J, Gao*, J, Qiu, Y. Low cycle fatigue performance of DP900 steel under cyclic shear paths. Fatigue Fract Eng Mater Struct. 45，1，22-39.2021-10-27; 1- 18. doi:10.1111/ffe.13578 (3.459) Ge Wang, Heng Ouyang, Yishi Su, Qiang Guo, Ding-Bang Xiong, Qianduo Zhuang, Zhenming Yue, Zan Li, Di Zhang (2021). Heterostructured bulk aluminum with controllable gradient structure: Fabrication strategy and deformation mechanisms. Scripta Materialia, Volume 196, 15 April 2021, 113762. (IF5.611) Yahui Huang, Zhiyu Tuo, Keyu Qu, Zhenming Yue, Houssem Badreddine, Jun Gao, Yuliang Qiu, Jiao Sun, Investigation and comparison of three noval strain rate-dependent fracture criteria, Materials Science and Technology  (IF1.92),  Pub Date : 2021-09-02, DOI: 10.1080/02670836.2021.1969782 Behzad Sadeghi, Zhanqiu Tan*, Jiashuo Qi, Zhiqiang Li, Xinrui Min, Zhenming Yue*, Genlian Fan, Enhanced mechanical properties of CNT/Al composite through tailoring grain interior/grain boundary affected zones, Composites Part B: Engineering, Volume 223, 15 October 2021,109133 (SCI 9.078) Guangyuan Lin, Yifei Peng, Yusen Li, Hanzheng Liang, Zhilei Dong, Yihu Zhou, Zhenming Yue, Jie Zhang, Ding-Bang Xiong*, Di Zhang*, Remarkable anisotropic wear resistance with 100-fold discrepancy in a copper matrix laminated composite with only 0.2 vol% graphene, Acta Materialia, Volume 215, 15 August 2021, 117092(SCI 8.203) Kai Zhang, Houssem Badreddine, Zhenming Yue*, Naila Hfaiedh, Khemais Saanouni, Jianlin Liu*, Failure prediction of magnesium alloys based on improved CDM model, International Journal of Solids and Structures, Volumes 217–218,2021,Pages 155-177,，2021.01.21 (3.9) Zhenming Yue, Xinrui Min, Zhiyu Tuo, Celal Soyarslan, Xincun Zhuang*, Houssem Badreddine, Khemais Saanouni, Jun Gao*, Broad stress triaxiality ratio band fracture experiments in DP900 metal sheets and corresponding predictive capability of advanced phenomenological and micromechanical fully coupled damage models, Materials Science and Engineering: A Structural Materials: Properties, Microstructure and Processing，Volume 811, 15 April 2021, 140978. (5.234) 张 凯，岳振明*，基于改进型CDM模型的AA365-T7板材失效预测，塑性工程学报，2021, v.28(06) 26-33。  2020 Xiaowen Fu, Zhanqiu Tan*, Xinrui Min, Zan Li,* Zhenming Yue, Genlian Fan, Ding-Bang Xiong & Zhiqiang Li (2021) Trimodal grain structure enables high-strength CNT/Al-Cu-Mg composites higher ductility by powder assembly & alloying, Materials Research Letters, 9:1, 50-57, (SCI: 7.323) M. Yetna N’jock*, H. Badreddine*, C. Labergere, Z. Yue, K. Saanouni, V.-T. Dang. An application of fully coupled ductile damage model considering induced anisotropies on springback prediction of advanced high strength steel materials. Int J Mater Form (2020). https://doi.org/10.1007/s12289-020-01582-9; 李玉森，岳振明*，妥之彧，闵鑫瑞，高军，铝合金管材6061自由弯曲成形工艺仿真及优化，工程科学学报，第42卷，第6期：769−777，2020年6月； Li, Y., Li, A., Yue, Z*. et al. Springback prediction of AL6061 pipe in free bending process based on finite element and analytic methods. Int J Adv Manuf Technol, 2020, 109, 1789–1799； Qi, J., Yue, Z*., Tuo, Z. et al. Investigation on the Evolution of Subsequent Yield Surface of Pure Aluminum Under Changing Loading Paths Considering Microstructure Effects. J. of Materi Eng and Perform (2019). 29(1), 303-314. Wang Y, Tuofu Z, Yue Z*, et al. Research on adhesion strength and optical properties of SiC films obtained via RF magnetron sputtering[J]. Chinese Journal of Physics, 2020, 64: 79-86. Tuo, Z., Yue, Z*., Zhuang, X., Min, X., Badreddine, H., Qiu, L., & Gao, J. (2020). Comparison of two uncoupled ductile damage initiation models applied to DP900 steel sheet under various loading paths. International Journal of Damage Mechanics. https://doi.org/10.1177/1056789520945002. (IF 3.125) Pub Date : 2020-07-28 2019 Yue Zhenming*, Badreddine Houssem, Saanouni Khemais, Labergere Carl. Metal Forming Simulation Based on Advanced Mechanical Model Strongly Coupled with Ductile Damage, Springer Nature 2020 - Encyclopedia of Continuum Mechanics (连续介质力学百科全书), Springer-Verlag GmbH Germany, 2019. Z. Yue*, K. Cao, H. Badreddine, K. Saanouni, J. Gao, Failure prediction on steel sheet under different loading paths based on fully coupled ductile damage model, International Journal of Mechanical Sciences, 23-JAN-2019, 153, 1-9. (SCI IF3.57) Cao K, Yue Z*, Qi J, et al. Hybrid Inverse Parameter Identification of Fully Coupled Ductile Damage Model for Steel Sheet DP600 with Two Different Algorithms: Trust Region and Genetic Algorithms[J]. Journal of Materials Engineering and Performance, 2019, 28(5): 3149-3156. Song, S. , Sun, H. , Chen, S. C. , Dai, M. , Wang, K. , Zheng, X. , Lu, Y., Yang, T., Yue, Z. ,(2019). The adhesion strength and mechanical properties of sic films deposited on sialon buffer layer by magnetron sputtering. Surface and Coatings Technology, 360, 116-120. 2018 Yue, Z.; Qi, J.; Zhao, X.; Badreddine, H.; Gao, J.; Chu, X. Springback Prediction of Aluminum Alloy Sheet under Changing Loading Paths with Consideration of the Influence of Kinematic Hardening and Ductile Damage. Metals 2018, 8(11), 950.(SCI IF1.7) Zhenming. YUE, Limin. YANG, Jianhong, GONG, Jun. GAO*,Synthesis and comparison of two cBN composites with starting ternary carbide binders, Journal of Materials Engineering and Performance,2018.05, Volume 27, Issue 5, pp 2124–2130 (SCI IF1.33). Chu, X. R., Wang, L., Lin, S. X., Yue, Z. M*., & Gao, J. Experimental Investigation on Formability of AZ31B Magnesium Alloy V-Bending Under Pulse Current. Acta Metallurgica Sinica (English Letters), 1-9. Lin S X, Chu X R, Yue Z M*, et al. Effect of Temperature on the Dynamic Recrystallization of AZ31 Alloy with Pulse Current[J]. Acta Metallurgica Sinica (English Letters), 1-6. Ding, J., Yue, Z., Sun, J*. and Gao, J*., 2018. Effects of nano-silicon dioxide surface modification on the morphology and mechanical properties of ABS/PMMA blends. Journal of Polymer Engineering, 38(7), pp.617-623. 魏国玲，廉爱东*，曹可，刘卓斌，岳振明，T型管的液压成形研究及模拟分析，材料科学与工程学报 Yue Z, Chu X, Gao J*. Influence of ductile damage on springback prediction of aluminum alloy sheet under changing loading paths[J]. Procedia Manufacturing, 2018, 15: 716-721. J.S. Qi, Z.M. Yue*, K. Cao, Y. S. Li, J. Gao, Crystal Plastic Finite Element Simulation and Texture Analysis of Aluminum, Conference Paper, Jan 2018, DOI: 10.5220/0007438903640370; Y.S. Li, Z.M. Yue*, F.R. Liu, J.S. Qi, J. Gao, The Design and Analysis of Free Bending Tube Bending Machine, Conference Paper, Jan 2018, DOI: 10.5220/0007435301150121. 2017        Yue Z M*, Badreddine H, Saanouni K, et al. Experimental and numerical studies of AL7020 formability under orthogonal loading paths with considering yield surface distortion[J]. International Journal of Mechanical Sciences, 2017, 123: 151-161. (SCI IF3.57) Z.M. YUE, X.R. Chu*, J. Gao, Numerical simulation of incremental sheet forming with considering yield surface distortion, International Journal of Advanced manufacture technology,  Volume 92, Issue 5–8, pp 1761–1768. (SCI IF 2.2). Yang L, Yue Z*, Gong J, et al. Compositions, mechanical properties and microstructures of cBN-based composites sintered with Al or TiC[J]. Advances in Applied Ceramics, 2017, 116(5): 254–259 (SCI IF1.32). 赵晓迪, 岳振明*, 高军, 褚兴荣, 非线性组合硬化条件下镁合金板料变形回弹预测, 工程科学学报2017, (04) 550-556 (EI期刊). 2016        Yue Z, Yang L, Gong J, et al. Experimental Investigation on Microstructure and Mechanical Properties of cBN–Ti3SiC2 Composites[J]. Advanced Engineering Materials, (2016.07.14), 18(9): 1568-1573. (SCI, IF 2.31). Z.M Yue, K. Saanouni, H. Badreddine, X.C.Zhuang, J. Gao*. Numerical simulation of sheet metal blanking based on fully coupled elastoplasticity-damage constitutive equations accounting for yield surface distortion-induced anisotropy, International journal of damage mechanics, Volume: 26 issue: 7, page(s): 1061-1079 (SCI, IF 1.78). Badreddine H, Yue Z M, Saanouni K. Modeling of the induced plastic anisotropy fully coupled with ductile damage under finite strains[J]. International Journal of Solids and Structures, 2017, 108: 49-62. (SCI, IF2.76) . Ding J, Yue Z M, Sun J, et al. Effect of ABS/PMMA/EMA ternary blending sequence on mechanical properties and surface glossiness[J]. Journal of Polymer Engineering, 2016. 36(6): 625-633. (SCI, IF0.6) Ding J, Yue Z M, Sun J, et al. Properties of ABS/PMMA Binary Blend and ABS/PMMA/MBS Ternary Blend: Influence of Rubber Particle Size [J]. Polymer (Korea), 2016, 40(5): 655-662, (SCI, IF 0.38). Yang L, Gong J, Yue Z, et al. Preparation and characterization of cBN-based composites from cBN-Ti 3 AlC 2 mixtures[J]. Diamond and Related Materials, 2016, 66: 183-187. (SCI, IF2.12). 2015         Z.M. Yue*, H. Badreddine, Thai Dang, K. Saanouni, A. E. Tekkaya, Formability prediction of AL7020 with experimental and numerical failure criteria. Journal of Materials Processing Technology, (2015.04.01), 218: 80-88. (SCI, IF 3.14). Zhenming Yue, Xincun Zhuang, Xingrong Chu, Houssem Badreddine, Jun Gao, Evaluation of the sheared edge of the metal blanking process with one ductile damage model combined the induced anisotropy，Proceedings of the 2015 2nd International Conference on Computer, Intelligent and Education Technology.(EI会议). Chu X R, Lin S X, Yue Z M, et al. Research of initial dynamic recrystallisation for AZ31 alloy with pulse current[J]. Materials Science and Technology, 2015, 31(13): 1601-1606. (IF 0.8). S.X. Lin, X.R. Chu, Z.M. Yue, J. Gao and C.S. Zhang. Experimental investigation on deep drawing behavior of AZ31 alloy sheet under crank press. Materials Research Innovations, (2015), 19(S1), S1-41-S1-44. (IF 0.47). 2014         Z.M. Yue*, C. Soyarslan, H. Badreddine, K. Saanouni, A. E. Tekkaya. Identification of fully coupled anisotropic plasticity and damage constitutive equations using a hybrid experimental–numerical methodology with various triaxialities. International journal of damage mechanics. (2014.08.04), 24 (5): 683-710. (SCI, IF 1.5) Yue Z M, Badreddine H, Saanouni K. A New Model Describing Plastic Distortion Fully Coupled with Ductile Damage[J]. Procedia Engineering, 2014, 81: 1234-1239. (EI会议) Yue Z M, Badreddine H, Saanouni K, et al. On the distortion of yield surface under complex loading paths in sheet metal forming, IDDRG. 2014. 2013         Yue Z M, Soyarslan C, Badreddine H, et al. Inverse identification of CDM model parameters for DP1000 steel sheets using a hybrid experimental-numerical methodology spanning various stress triaxiality ratios. Key Engineering Materials. 2013, 554: 2103-2110. (EI会议)